Primary Current Injection Tester - AC High Current

Primary Injection test sets are used to loading. Calibration and testing of CT's bimetals relays, Protection relays etc. Mostly Primary Injection Test set are designed as per customer's specification. The Primary Injections Test sets are of 15 minutes ON/30 Minutes OFF duty i.e. testing duty only. Loading transformers are design for continuous use for Temperature Rise for bus duct/Bus Bar etc. Optional accessories requirement may include cable termination, timer, Temperature Indicator, multiple contactor, individual Phase control etc.

SPECIAL FEATURES

• Compact in nature
• It is available in portable trolley type/stationery type model Amps.
• Optional digital/analogue timer.
• Main Transformer upto 25,000 Amps Naturally air cooled type.

TECHNICAL SPECIFICATIONS

STEP DOWN TRANSFORMER : A double wound transformer is used for supplying high current at low voltage for testing.

CURRENT CONTROL : A step less Auto Transformer is used for Controlling output current from Zero to Maximum.

INPUT VOLTAGE : 230/415 Volts single/two/three phase 50Hz. AC supply

OUTPUT VOLTAGE RANGES : As per requirement.

OUTPUT CURRENT : Upto 25000 Amps.

CAPACITY : Up to 500 KVA

DUTY : 15 Minutes ON-30 Minutes OFF in case of Primary Injection test set and continuous in case of Loading Transformer.

METERING : Multi range Ampere meter of class 1.5 with CT of class 0.5 are provided on secondary side to indicate output current.

PROTECTION : ON-OFF Switch with fuse is provided to protect the unit against short circuit, push button to actual and cut of output.

HOUSING : Each unit is housed in a MS sheet body, supported with angle iron frame. The oil cooled models are housed in suitable MS tank and the control panel is on the tank or as per requiems.

OPTIONAL : (a) Voltmeter (b) Timer as per requirement (c) Rubber cable (c) Zero start interlocking with by pass switch.

TERMINATION : The output is brought out on suitable Bus Bar/Terminals.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

Variable Auto Transformers Manufacturers Exporters to UAE, Saudi Arabia, Oman, Yemen

Wherever voltage control is required, ‘RE’ Variacs makes it very simple by providing Toroidally wound Auto Transformer for variable voltage. If you have not yet used ‘RE’ Variacs you are missing some important benefits of using electric power. The maximum current that can be drawn depends on the size of the wire used. The ‘RE’ Voltage regulators are manufactured from 2 A to 2000 A for Single and Three Phase.

SPECIAL FEATURES

• Compact in Size.
• Easy to operate.
• Special Insulating Paper is used for transformer winding.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

TECHNICAL SPECIFICATIONS

‘RE’ Variac Continuously Variable Auto Transformers usually form part of system in which other components such as transformers. Diode etc. are used as power components, ‘RE’ Variac Engineers are well experienced in such applications and are always available for consultation to prospective users.

The proportion between iron section and copper turns is such that at the maximum AC applied voltage maximum NO LOAD current is within 5%.

The insulation of the wire over one face is removed the output is taken between one end and the brush arm. The moving Brush contacts the next turn before it breaks away from the previous turn, thus, there is no interruption in output voltage.

‘RE’ Variac is designed to Boost the Output, Voltage by 12% than the input voltage. Three Single phase units are connected in star for 3 phase four wire system. The brush arms are moved by a common shaft and the Star point is connected to the neutral of the system. A three phase voltage variable from zero to 470V is obtained, if the Input voltage is 415V in case of single phase 270V is obtained if input is 240V. Custom made capacities can be manufactured and as yet the manufacturing range covers upto 2000 Amperes in three phase.

OPTIONAL: ‘RE’ Variacs are available with motor drive. The type of motor used for driving is specially made for this application. It is 240V AC motor operating with speed of 60 RPM synchronous at 50Hz. It is instantly reversible and can be stopped without overrun. It speed depends on frequency i.e. 60 RPM at 50 Hz. Supply. The desired speed is obtained by suitable by gearing. It starts stops & reverses instantly. It is ideal for automatic voltage control through Electronic system. *It can be stalled indefinitely without over heating.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

High Voltage A.C. Insulation Test Sets (Rubber / Acrylic / Fiber etc.) India

It shall be a compact high voltage A.C. insulation tester which may be powered by internal re-chargeable batteries and or by 230 V single phase AC supply. It shall display resistance at maximum leakage current 3mA. The unit shall be suitable for polarization Test.


For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

Oil Di-Electric Test Set Manufacturers Exporters Suppliers Delhi, Noida, Gurgaon, Ghaziabad, Faridabad NCR

A transformer Oil Breakdown Test Set is an equipment that measures the Di-electric Strength of the oil. The equipment consist of two High Voltage Coils having Starting winding at earth potential. The High Voltage Transformer is designed for testing Duty only. The equipment is made for testing transformer oil as per IS Specification. Regarding Transformer Oil and Electrode shape.

Manual Oil Test

• Motorized Oil Test set with Manual / Auto stirring
• Semi Automatic Oil Test Set.
• Manual Oil Test

This system utilizes Variac having knob to rise the voltage output manually. The equipment consist of Voltmeter provided in Primary Circuit to indicate output voltage even after the Breakdown and consist of Fast tripping circuit, Zero start end lock, cage door interlock and operation safety.

Motorised Oil Test Set Manual / Auto Stirring

The system utilizes a motirized variac for rise of voltage at a pre-set rate of rise of voltage generated. A double throw switch is provided with circuit off Zero started. Locking pre-set tripping arrangement, cage door interlock and operation safety features.

Semi Automatic Oil Test Set

Same as above but rising and lowering of the voltage shall be Automatic with pre-set Weight time for stirring and supply.

Automatic Oil Test Set

This is a micro-processor based the programming is pre-set with the provision to change the programming weight time as per the used.

Sample Number, Operator Code, Memory etc. The results can be viewed on a backit.

• Built in Safety Features
• Auto towards operation i.e.80 x 20 Column LCD Display.
• Real time clock & Date
• Printer Facility
• Computer Interface
• Seven Record Memory

TECHNICAL DETAILS

STEP UP TRANSFORMER : A double wound secondary Epoxy molded Air cooled / oil cooled transformer is used to boost the voltage to required voltage.

VOLTAGE CONTROL : A step less auto-transformer (Variac) is used for controlling the output from zero to maximum.

INPUT VOLTAGE : 220/230 V single phase

OUTPUT VOLTAGE : 0-50 KV, 0-60 KV, & 0-100 KV

CAPACITY : 0.5 KVA to 1 KVA

METERING : Voltmeter is provided on LT side, calliberated to indicate the secondary output voltage.

ELECTRODE : Suitable size of electrode with adjustable gap is provided

PROTECTION : 

• The unit consists of fast acting DC relay provided on HT side to cut off the HT supply in case of flash. 
• Zero start interlocking is provided

TEST CUP : A test cup of suitable size made of transparent thermoplastic

CONTROL : 

• Potentiometer for output Voltage Setting.
• Switch for manual and auto use.
• Push button to increase or decrease voltage manually in case of manual position.

PROTECTION : The design of the unit is such that it can withstand 20 percent overloading for short durations without any damage. Each unit consists of minimum-maximum range indicator, motor movement control Micro switch at the end of the range and oil Inlet & Outlet valve, oil level indicator, lifting arrangement for whole unit and transformer only, cooling radiator as per the capacity requirement.

OPTIONAL : Ampere meters, On-Off/switches Fuse, change over switch, under over voltage protection & indication with or without tripping, Arrangement, single phase protection. with or without contractor.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

AC High Voltage Test Sets - Breakdown Type - Manufacturers Exporters Delhi India

'RE' High Voltage Breakdown Testers are specially designed for testing electrical appliances as per I.S. Specifications. 'RE' High Voltage Breakdown Testers have been designed by us on the basis of long experience. During manufacturing each unit is tested at various stages, thus ensuring consistent & best quality. These instruments are air cooled or oil cooled or air and oil cooled combined as per requirements.

SPECIAL FEATURES

• Compact in Size.
• Easy to operate.
• Built-in safety arrangement for operator.
• Special Insulating Paper is used for transformer winding.
• Guaranteed for one year against manufacturing defects.

TECHNICAL SPECIFICATIONS

TRANSFORMER : A double wound step up transformer is the most important part of the instrument. The Transformer is wound with high quality enameled copper wire. Polyester film / Craft paper is provided in between the layers.

VOLTAGE CONTROL : A step-less auto- transformer is used for controlling the output from zero to maximum.

METERING : Voltmeter is connected on LV side to indicate HV output.

INPUT VOLTAGE : 230 / 415 Voltage AC 50Hz Single Phase

OUTPUT VOLTAGE RANGES : Upto 150 KV

LEAKAGE CURRENT : Upto 200 mA

METERING : Voltmeter is provided in L.T. side ,to indicate HV output.

DUTY : For testing - on time 1 or 5 or 15 minutes (to be specified)

TERMINATION : One end at earth potential and other at HV insulator.

PROTECTION : (a) A fast acting DC relay actuates to isolate high voltage in case of fault.

(b) The unit has interlocking arrangement so that HV will not actuate unless variac is at zero position.

FAULT INDICATORS : Lamp will glow whenever fault occurs in the object which is under test (audio alarms can be provided if asked for)

ADDED FEATURES : (a) The Voltmeter will help indicating the voltage at which the object under test has failed.

(b) The control panel in all the models is naturally air cooled. H.V. Transformer is air /oil cooled depending upon capacity.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com