Saturday, April 09, 2011

Portable (Hipot) DC High Voltage Test Set Suppliers

Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error.

SPECIAL FEATURES

  • Available in 30, 60, 75, 120, 150 & 220 kV models
  • Easy to operate
  • Digital meters for easy readability.
  • High Voltage Surge protection
  • Multiplier circuit for better life.




TECHNICAL SPECIFICATIONS

Input: 
220/230 Volts Single Phase 50Hz. Ac supply.

Output: 
15-220 kV

Capacity: 
150-2200W

Cooling: 
Naturally Air Cooled.

Control: 
SteplessRating : Continuous for testing duty.

HT CABLE: 
The equipment is supplied with five meters long cooper braided H.T. cable with HT plug and socket. The braiding remains on earth potential.

LT CABLE: 
For input supply ten meters long 3 core cable is provided.

ZERO START INTERLOCKING: 
This is to ensure that the H.T. shall not actuate if the voltage control knob is not at zero position.

EARTH INTERLOCKING: 
If proper earth is not connected the HT shall not actuate.

AUTO DISCHARGING ARRANGEMENT: 
The equipment consists of automatic cable discharging arrangement.

SOCKET: 
H.T. plug and socket has been especially developed by us with automatic earthing arrangement

METERS: 
mA meter and Volt meter are provided on H.T. side. The meters are well protected against surges and spikes.

OVER VOLTAGE PROTECTION: 
H.T. Automatically trips in case of output voltage exceeds the preset level.

SURGES AND SPIKES PROTECTION: 
During the testing surges or spikes are often generated due to short circuit. The equipment is fully protected against these.


For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com