These are manufactured for various purposes like electroplating, anodizing, chemical processes, and power supplies for Magnetic Charger, Battery Charger, Copper and silver refining and Drawing Large Generator Motor Transformer etc. Each of the above listed products are a field of there own. The rectifiers are designed for continuous use for which they can be air / and Oil Cooled. We have so far supplied 10,000 amps @ 80 volts maximum. The electronic controls can be provided which are used for various functions optional like, current density control, voltage control, temperature, speed control etc.
SPECIAL FEATURES
- Highest rating available
- Various feature & functions upon request
- Electronic parameter monitoring.
TECHNICAL DETAILS
STEP DOWN TRANSFORMER : A double wound transformer is used for supplying high current at low voltage for testing.
CURRENT CONTROL : A step less Auto Transformer is used for Controlling output current from Zero to Maximum.
INPUT VOLTAGE : 230/415 Volts single/two/three phase 50Hz. AC supply
OUTPUT VOLTAGE RANGES : As per requirement.
OUTPUT CURRENT : Upto 25000 Amps.
CAPACITY : Up to 500 KVA
DUTY : 15 Minutes ON-30 Minutes OFF in case of Primary Injection test set and continuous in case of Loading Transformer.
METERING : Multi range Ampere meter of class 1.5 with CT of class 0.5 are provided on secondary side to indicate output current.
PROTECTION : ON-OFF Switch with fuse is provided to protect the unit against short circuit, push button to actual and cut of output.
HOUSING : Each unit is housed in a MS sheet body, supported with angle iron frame. The oil cooled models are housed in suitable MS tank and the control panel is on the tank or as per requiems.
OPTIONAL : (a) Voltmeter (b) Timer as per requirement (c) Rubber cable (c) Zero start interlocking with by pass switch.
TERMINATION : The output is brought out on suitable Bus Bar/Terminals.
