DC High Voltage Testing Equipment Manufacturer Supplier Exporter

Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error.

SPECIAL FEATURES

• Available in 30, 60, 75, 120, 150 & 220 kV models
• Easy to operate
• Digital meters for easy readability.
• High Voltage Surge protection 
• Multiplier circuit for better life.

For further details or requirements, Email us or send Enquiry

AC Electrical Machines Heat Cycle Test

Heat Cycle Test Set is designed for working on 400 V, 2 phases of 3 phase AC supply. The unit shall generate 3000 Amperes in cables loop of 11 meter of suitable capacity.

The set shall comprise of the following:-
i) Control Panel
ii) 2 Nos. Current Injection transformer (suitable for output of 3000 Amps at 7.5 V each



For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

DC High Current Contact Resistance Meter

'RE' Contact Resistance Micro-Ohm Meter model RE-CR-100 is capable to measure resistance between 0.1 micro ohm to 2 milli ohm. The instrument can provide test current between 20A - 200A subject to the load resistance and supply voltage. The system uses four terminals - two for current supply and two for resistance measurement.

The unit has high current capability and is of compact design suitable for testing high current contacts for circuit breakers, switches, bus-bar joints, and other application where high current junctions exist. The unit is housed in M.S. sheet housing is light in weight and is supplied complete with 2 nos. Current leads with clamps and 2 nos. potential leads with clips.

SPECIAL FEATURES

• Compact size for portability
• Easy to operate and operation manual is provided
• Built in safety arrangement for operator and equipment
• Efficient after sales service
• Guarantee for one year against manufacturing defects

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

High Voltage Testing Equipment Manufacturer Exporter India

Rectifiers & Electronics, Popularly known as 'RE', is the Pioneer Organization in the field of High voltage testing equipment such as AC/DC High Voltage Test Sets and Other Electrical High Voltage Test Equipment in INDIA. In the last 33 Years, Through Continuous Aspirations, 'RE' has earned the Goodwill of Quality Control Engineers and Research Scientists Through out the Country. 

'RE' was Established in 1970 with a Mission to cater to the Manufacturers of Northern India with the Cutting Edge Technology in the Field of Electrical Testing. 'RE' which was initiated as a Regional Concern, Soon Started Playing a Vital Role in Development of the Industry of the Entire Nation. 'RE' has been a Leading Exporter of High Voltage Testing Equipment to Countries like United Kingdom, Zambia, Kenya, Germany, Dubai, Bangladesh, Bhutan, Nepal, etc.

'RE' Manufactured Products are Robust, Reliable, Simple to Operate, and User Friendly. At 'RE', there is Continuous Effort to give Its Customers an Edge over Their Competition. We at 'RE' have complete in house Manufacturing Facility Inclusive of, "Fabrication of Housing, Construction of Transformer, Testing at every Stage, and Assembly of the Final Unit", which enables us to meet the Stringent Quality Norms.

To Support the Manufacturing Processes 'RE' also holds an In-House Research & Development Facility for Improvement & Innovation on Existing Technologies & Products AND for Discovery & Invention of New Technologies & Products - A Strength that has kept 'RE' far-ahead of Competitors and made 'RE' the Preferred Supplier of High Voltage Testing Equipment for Institutions and Facilities all over the Country.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

DC High Voltage Million Mega Ohm Meter

Million mega ohm Meters are designed for measurement of insulation resistance of insulating materials, Electrical & Electronic Components, Cables, Panels, Transformers, chokes, PCB's, Plugs & Sockets and many similar products. They are especially designed for testing cables & wires keeping in view high charging current of capacitive loads.

The unit consists of built in arrangement for charging the capacitor and indicates the value of insulation after preset time. This facility ensures efficient working of the unit.

SPECIAL FEATURES

• Solid State Circuit
• More reliable than hand cranked/motorized models
• Simple to operate
• Can be used on all types of insulation material

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

AC High Current Secondary Current Injection Test Set

'RE' Secondary Injection Test Sets have been designed keeping in view the requirements of field and laboratory. The sets are portable, light in weight, yet having all the technical features for testing relays and contractors.

SPECIAL FEATURES

• Compact Size.
• Built in safety arrangements in case of short circuit and over loading.
• Easy to operate.
• Efficient after sales service.
• Guaranteed for one year against manufacturing defects

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

AC High Voltage - 500 KV, 1000 KVA

AC High Voltage - 500 KV, 1000 KVA


For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

High Voltage Test Sets Testers Manufacturers Exporters from India to Dubai, UAE

'RE' High Voltage Low Capacity Testers are specially designed for testing electrical, industrial appliances/Installations as per IS. Specifications. 'RE' High Voltage testers have been designed & developed in house. During manufacturing each unit is tested at multi stages, thus ensuring consistent & best quality. 

These instruments are air-cooled, oil-cooled or air & oil cooled combined as per requirement. Beside common HV Test Kit, we manufacture PD free cascaded with indicator to reduce the input testing current. 

SPECIAL FEATURES

• Supplied unto 15 KV at 50mA 
• Complete In-House Design 
• Computer interface facility & test data monitoring 
• HT Transformer in single housing for 15 minutes on/off duty
• Guaranteed for a year of operation from the date of commissioning.

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

DC High Current Testers/Test Set - Milli Volt Drop Test Set

DC High Current Testers/Test Set - Milli Volt Drop Test Set

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

Winding Resistance Meter Manufacturers Exporters to South Africa, Zimbabwe

DESCRIPTION 

The ‘RE’ High Current Resistance Meter delivers high performance where it counts. With unmatched speed, range and accuracy it is the best solution for low resistance measurements on transformers, motors, breakers, switchgear, etc. Virtually all sizes of transformer can be measured – from small pole top units to the largest transmission units with Y or D configuration. Extensive firmware provides fully automatic operation and a vast array of additional support functions. This new design responds to the needs of utilities and transformer manufacturers for a lightweight, portable unit with high accuracy and ease of operation. Its powerful 1 kW/2.5 kW DC power supply and the processor controlled circuitry are more than adequate to handle even the most demanding measuring application. 

SPECIAL FEATURES 

• Capable of winding resistance measurement of virtually any size and type of transformer, single or three phase, delta (W) or star (Y) configuration. 
• Rapid discharge circuit greatly improves measurement procedure. 
• High precision – typical 0.5%. 
• Compact and rugged for field or factory use. 
• Fully automatic operation. 
• Three measurement channels plus RTD channel. 
• Memory for storage of 99 measurement results and 2 measurement setups. 
• Data transfer possible without additional software.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

AC High Voltage Testers / Test Sets - Cascaded Exporters India, Ghana, Togo

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

High Capacity AC High Voltage Test Sets/Tester Manufacturers Exporters Libya, Egypt

‘RE’ High Voltage High capacity testers are specially designed for testing cables and Electrical Equipment as per I.S Specifications.

‘RE’ High Voltage Testers have been designed and developed in house. During manufacturing each unit is tested at multiple stages, thus ensuring consistency and best quality. These instruments are cooled air cooled, oil cooled or air and oil cooled combined as per requirement.

SPECIAL FEATURES

• Supplied up to 300KV and 100mA.
• Light in weight.
• Casted Wheel for easy movement.
• Multiple safety locks for the operator.
• Build in safety for operator
• Efficient after sales service.
• Guaranteed for one year against manufacturing defects only.

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

AC High Voltage Testers/Test Sets Manufacturers Suppliers Morocco, Algeria

'RE' High Voltage Low Capacity Testers are specially designed for testing electrical, industrial appliances/Installations as per IS. Specifications. 'RE' High Voltage testers have been designed & developed in house. During manufacturing each unit is tested at multi stages, thus ensuring consistent & best quality.

These instruments are air-cooled, oil-cooled or air & oil cooled combined as per requirement. Beside common HV Test Kit, we manufacture PD free cascaded with indicator to reduce the input testing current

SPECIAL FEATURES

• Supplied unto 15 KV at 50mA
• Complete In-House Design
• Computer interface facility & test data monitoring
• HT Transformer in single housing for 15 minutes on/off duty.
• Guaranteed for a year of operation from the date of commissioning.

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

Single Phase Phantom Load Tester Manufacturers Exporters India

‘RE’ Phantom Loading Bench suitable for 3 phase 4 wire, 3 phase 3 wire and single phase Meters with Electronics and Electro-mechanical type.

Single phase Phantom Load Test set having following details:


Input voltage: 230 Volts.


Output voltage: 300 V


Output current: 0.5, 1.0, 2.5, 5.0, 25.0, 40.0, 80.0 Amp


Power Factor: .0.5, 0.8 Lag – lead through unity.


Metering: Voltmeter, Ampere meter & PF meter – Digital


Capacity: Testing of three meters at a time.


Control: Voltage & Current control will be through variacs.

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

Magnetizing Coil Manufacturers Exporters to Oman, Yemen

A.C. Magnetic Coil design for working on 400V, 50 HZ AC supply capable to induce 28000 Amp turns for testing the magnetic influence on Energy Meter, Circular AIR Core coil having 200 mm OD,38 mm ID,50 mm depth (.27tesla)

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com

Induced Over Voltage Test Set (I.O.V.W.) / D.V.D.F. Exporters to Saudi Arabia, United Arab Emirates (UAE)

INTRODUCTION

Induced Over Voltage Test Set is used for testing the strength of insulation between turns and between other points of the transformers etc. as stipulated by BIS or other standard specification. For this test Double Voltage is applied across L.T. terminals for one minute, and to control the magnetizing current over voltage frequency is applied.

It is and independent unit having coupled motor and Generator with Control Panel to control the motor ad output voltage. Depending upon the design requirements AC or DC motors are used.

SPECIAL FEATURES

• No foundation required
• Unit ready for use.
• Fine Voltage control.
• Short Circuit Protection.
• Calibrated Voltage and Ampere Meter.
• Easy to operate complete with operator safety features.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

TECHNICAL DETAILS

The control panel consists of direct on-line or Star-Delta depending upon capacity of the setup. Moving Coil Voltmeter and Ammeter are provided to indicate the output voltage and current. Frequency meter is provided to check output frequency. While for measuring input voltage and current, moving iron type meters are used. Other included parts consists of variac, indicators, control switches and operator safety features. In case of DC motor, DC drive is used to control/vary the frequency.

INPUT VOLTAGE : 415V, 3 phase 50Hz AC supply

OUTPUT VOLTAGE : 0 -1500 V or As Required

OUTPUT FREQUENCY : 100 Hz to 400 kHz or As Required

CAPACITY : Upto 2000 kVA or As Required

FOUNDATION : Not Required

PROTECTION : Zero Start Inter Locking, Overload Protection, Single Phasing Preventer etc

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

Heat Cycle Test Manufacturers Suppliers Bahrain, Qatar, Lebanon

Heat Cycle Test Set is designed for working on 400 V, 2 phases of 3 phase AC supply. The unit shall generate 3000 Amperes in cables loop of 11 meter of suitable capacity.

The set shall comprise of the following:-

i) Control Panel

ii) 2 Nos. Current Injection transformer (suitable for output of 3000 Amps at 7.5 V each.)

TECHNICAL DETAILS

i) Control panel shall consists of the following:

• Motorised voltage regulator oil cooled type designed for 2 phase of 3 phase AC supply.

• Moving Iron type 96 Sq. mm Voltmeter to indicate incoming voltage of the regulator.

• Moving Iron type 96 Sq. mm Voltmeter to indicate output voltage of the regulator.

• Moving Iron type 96 Sq. mm Ammeter of suitable range to indicate primary current of loading transformer.

• Moving Iron type 96 Sq. mm Ammeter and current transformer to indicate secondary current of loading transformer.

• Digital temperature controller to control the automatic switching ‘ON & OFF’ of cable heating.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

Variable Auto Transformers - AC Electrical Machines Suppliers Iran, Iraq, Kuwait

Wherever voltage control is required, ‘RE’ Variacs makes it very simple by providing Toroidally wound Auto Transformer for variable voltage. If you have not yet used ‘RE’ Variacs you are missing some important benefits of using electric power.

The maximum current that can be drawn depends on the size of the wire used. The ‘RE’ Voltage regulators are manufactured from 2 A to 2000 A for Single and Three Phase.

Special Features

• Compact in Size.
• Easy to operate.
• Special Insulating Paper is used for transformer winding.
• Guaranteed for one year against manufacturing defects.
• Efficient After Sales Service.

Technical Specifications

‘RE’ Variac Continuously Variable Auto Transformers usually form part of system in which other components such as transformers. Diode etc. are used as power components, ‘RE’ Variac Engineers are well experienced in such applications and are always available for consultation to prospective users.

The proportion between iron section and copper turns is such that at the maximum AC applied voltage maximum NO LOAD current is within 5%.

The insulation of the wire over one face is removed the output is taken between one end and the brush arm. The moving Brush contacts the next turn before it breaks away from the previous turn, thus, there is no interruption in output voltage.

‘RE’ Variac is designed to Boost the Output, Voltage by 12% than the input voltage.

Three Single phase units are connected in star for 3 phase four wire system. The brush arms are moved by a common shaft and the Star point is connected to the neutral of the system. A three phase voltage variable from zero to 470V is obtained, if the Input voltage is 415V in case of single phase 270V is obtained if input is 240V. Custom made capacities can be manufactured and as yet the manufacturing range covers upto 2000 Amperes in three phase.

OPTIONAL: ‘RE’ Variacs are available with motor drive. The type of motor used for driving is specially made for this application. It is 240V AC motor operating with speed of 60 RPM synchronous at 50Hz. It is instantly reversible and can be stopped without overrun. It speed depends on frequency i.e. 60 RPM at 50 Hz. Supply. The desired speed is obtained by suitable by gearing. It starts stops & reverses instantly. It is ideal for automatic voltage control through Electronic system. *It can be stalled indefinitely without over heating.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

500 VA Phase Shifter Suppliers Turkey, Syria, Israel, Jordan

500 VA Phase Shifter suitable for working on 400/415 Volts 3 phase 50 Hz. AC supply shall be provided to be connected in potential circuit having phase angle control 90-0-90 Lag and Lead.

The Phase Shifter shall be independent unit and shall have approximate weight of 40 Kg.

i) All desired indication shall be provided.

ii) A Phase sequence indication shall be provided for RYB – RBY.

iii) A Voltmeter shall be provided.

The unit shall be naturally air cooled type and designed for field use duty.

For further details

Call us at: +91-11-41425851 / 52

E-mail us at: info@re-india.com

Resistive Load Bank Manufacturers Exporters to Costa Rica, Panama

For further details

Call us at: +91-11-41425851 / 52
E-mail us at: info@re-india.com